If possible, ensure the vacuum / exhaust is turned off before feeding the wax cloth through the Ironer, when the waxing cloth comes out of the Ironer it is extremely hot, wear protective gloves to prevent injury and hang the cloth over a rail to cool; this will prevent spontaneous combustion occurring.
How to protect yourself
Wear protective gloves to prevent burn injuries
Turn the vacuum / exhaust off before feeding wax cloth through the ironer
Feed an old condemned sheet through the ironer following the wax cloth
Hang the hot wax cloth over a rail to cool down before folding, this will prevent fire caused by spontaneous combustion
Do Not
Do not, if possible, feed the wax cloth through with the fan/exhaust on
Do not handle hot cloth with your bare hands
Do not fold the wax cloth, and hang up after use
Taping
Feeding into an Ironer with missing tapes may cause jam-ups, you must move to a different lane until the tape is replaced and report the missing tape to your Supervisor.
How to protect yourself
Move to a different lane until the tapes can be replaced
Do Not
Do not feed in front of missing tapes, particularly on a laned ironer
